aqua blue photoluminescent glow in dark adhesive tape, luminous sticker

10 meter per roll, blue green glow color
Welcome to contact us for OEM orders!

jnxingyi@aliyun.com

Photoluminescent printable film for inkjet printer, glow in the dark vinyl

Luminous aqueous inkjet print film is the next generation of digital output materials, high-resolution photos can be printed directly. This product is non-radioactive, non-toxic, is not the only power capable of emitting and displays the contents of green energy-saving high-tech products at night.
The product has a strong light-emitting display, sunlight, lighting and all visible light has a strong phosphorescent. After the visible light 5-15 minutes, in the dark up to 8-12 hours of self-luminous, and long-term repeated use, the new chic, very appreciate value.
https://www.facebook.com/glowpowders
Features:
1, this product is only suitable for water-based ink printing layer inkjet printing;
2, cutting easy, using a wide surface, can be directly used for inkjet printing;
3, STORING a short time, a large light-receiving area, high luminous intensity, long afterglow time;
4, non-toxic, no radiation, no pollution;
5, environmental adaptability, excellent heat resistance, cold resistance.;
6, the surface of the light uniformity, good finish;
7, PET base material, no shrinkage.
Application Scope:
free print production luminous photographs, stickers, wedding, decorative painting, tag, card, calendar, zodiac, auspicious patterns and other personalized luminous products, is emerging advertising, printing supplies.
Instructions for use:
1, this paper is mainly used for printing, please keep the surface clean and dry, especially not with a finger contact surfaces shall not allow water and other substances spilled on the surface, to prevent affect print quality.
2, printed photographs or other images should be dry covered after cold laminating film. (Conditional drying in the oven, the temperature controlled at about 50 C)
3, print settings: For best results recommended choice - photos, slides and other functions inkjet print (different models have different settings, print sharp images, print a small map test, adjusted to the optimum printing results )
Life:
more than 8 years of indoor and outdoor over 5 years.
Color:
green to yellow-based, other colors can be customized.  
Packaging and storage:
1, Packing: Carton
2, Storage: should be stored in ventilated, dry coffers

Glow in the dark adhesive tape, various width. Welcome OEM orders!

How much ratio of pigments should we take when make the luminescent products ?

This universal question has one answer. It is up to you. The amount of photoluminescent pigment to medium will depend on how much glow desired, cost effectiveness, type of application method etc. The Basic Guidelines dictate from 10% to 50% by weight. If you are producing a low cost item, then a lower percentage would work best for you. If you are screen printing shirts and want to make only one pass, a higher percentage would work better. Please also consider the particle size of the powder and the color of the surface to which the medium is going to be applied. Experimentation will be the best method of determining ratios after following the guidelines found on this paper. 

How to make photoluminescent ceramic glaze by using glow powder

Our pigment can be applied to make photoluminescent ceramic glaze directly. Following content is some information about the method of making photoluminesent ceramic glaze for your reference.
1.Make the based normal transparent ceramic glaze.The glaze should be ground thin,can through the 250mesh sieve.
2.Mixing well the photoluminescent pigment and the based ceramic glaze by the proportion of 4:6 to make the luminous ceramic glaze.
3.During the production,don't let the photoluminescent pigment touch with the metal material,otherwise the luminous effect will be affected
Use of Luminous Glaze of Pottery
1. Luminous glaze on the surface of internal brick wall
(1) Mix TGB-45M luminous glaze of pottery and water in the ratio of 1: 0.6—0.7 in ball grinding machine for about 20 minutes to prepare glair.
(2) Use the way of spreading, pouring and dropping glaze on the pottery blanks to form 200---400μm glaze layer.
(3) Let them dry.
(4) Quickly bake them for 35—50minutes with a temperature of 1000--1080℃ to get the glaze surface bricks that used on internal wall.　　　　　　　　　　　　　　　　　　　　　　　　　2. Luminous Ground Brick (with designs)
(1) Mix evenly TGB—45H luminous glaze of pottery and proper meshwork oil to get meshwork printing slurry.
(2) Print luminous glair using meshwork on the surface bricks with white unbaked glaze layer to form luminous designs.
(3) Pour transparent glair on the surface of designs.
(4) Bake them for 35—45 minutes with a temperature of 1100--1180℃ to get ground bricks with luminous designs.　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　3. Internal Wall Bricks with Luminous Design (Baked for three times)
(1) Mix TGB—45L luminous glair of pottery with proper printing oil of meshwork to prepare slurry for meshwork printing.
(2) Print luminous designs on the surface of baked bricks with white glaze.
(3) Pile transparent dry glaze powder on the luminous designs with meshwork.
(4) Bake them for 40—45 minutes with a temperature 900---1000℃ to get bulgy designs on the bricks for decoration of internal wall.
Notice:
1. Avoid attrition between luminous glaze and metals, or will influence luminous effects.
2. if there is settle in glair, add 2% pengrun earth to increase suspension of glair.
3. The preferential product applied is the transparent glaze produced by our corporation.

photoluminescent glow sticker luminous adhesive tape vinyl

Glow in the dark sticker, photoluminescent sticker
Glow color:  Yellow green
Thickness without back paper: 0.23mm
Materials: PET
Other available width:  1cm，2cm，2.5cm, 3cm, 5cm, 7.5cm, 10cm
Welcome to contact us for OEM orders!
About glow in the dark sticker
In general indoor lighting or natural light for about 20-30 minutes, you can continue to glow in the dark for 8 hours
  No power or other artificial energy use, the full use of natural light environment itself.
* Can be used permanently, non-radioactive, chemically stable, safe and reliable, good weather resistance.
* Long life, environmentally friendly, non-toxic, cost-effective. Super brightness,
  Allowing you to be more of a peace of mind in the dark.
* Glow in the dark tape not only bring you super warning effect, but also for your stage performances, adding a unique color.
This product is luminescent light-emitting strips, you must first absorption to light, so the light source shall be installed at.

Luminous Printing Ink Mixing Method and Direction for Use

These are the guidelines to making photoluminescent printing ink. Your application may require some adjustments to the technical material below. Mix the photoluminescent pigment into clear vehicles. Any other pigment in the medium will obscure the luminosity. Such photoluminescent printing ink is suitable for many surfaces such as paper, textile, wood, plastic, metal, ceramic, etc. The PL printing ink comprises PL pigment, organic resin, organic solvent and solvent assistant.

http://www.photoluminescentcn.com/4.technical%20support.html

How to make photoluminescent printing ink:
1. The choice of resin.

(1)Apply neutral transparent resin   ( Use transparent inks with pH levels around 7). We’d better to choose the resin for uncolored or transparent.

(2) Choose different transparent oil to mix into printing ink according to different materials. For instance, to print on metal, the mixed oil for metal should be chosen; print on PVC materials, the mixed oil for PVC material should be chosen.　

2. The choice of pigment.
Regarding the particle size of pigment, your better choice is 300grid/cm2(our specification of RBBx02,RBG x02). Because the pigment should be pass the silk-screen. Furthermore, bigger particle size will result in the more rough surface.

3. The dosage of PL pigment.

Generally speaking， 20%-50% by weight is the best ratio for mixing photoluminescent pigment to a vehicle. The percentage depends on how much glow is desired, how many passes you want to make, the screen mesh size, etc. If the base is a other color than white， you may need to add more pigments to achieve desired results. If the printing ink contains more luminous powder, the radiation degree will be higher and glow time will be longer.

4.  The technics of confect.
(1) Due to the nature of the photoluminescent pigment, an anti-settling agent may be required. photoluminescent pigment is heavier than most vehicles and settling does occur. Therefore use a viscous vehicle or an anti-settling agent,  always stir before printing.

(2) Do not use heavy metal compound as additive.
(3) Do not grind the photoluminescent pigment. If there is deposit, use containers with ceramic or glass inner and stir it with high speed.

(4)  Due to the nature of the photolumienscent pigment, it can deposit after long time storage. Just stir it while using, the deposit will not effect the luminosity.

Notice:

(1) The photoluminescent pigment will be dissolved in water somewhat and decomposed in acid liquid, so it can not be used in water-solubility and acidity solution(except for specially remarked).　　　　　　　　　

(2)The storehouse should be ventilated and dry, and the photoluminescent pigment should avoid to be affected with damp. It should be kept airproof if the photoluminescent pigment is not used totally.

(3) The afterglow brightness of photoluminescent pigment will diminish if photoluminescent pigment is gritted on the surface of the metal, so it can not touch metal.

Using for Luminous Printing Ink:

(1) Viscosity of ink should be about 3000-5000 micro-poises. During printing, viscosity should be adjusted by using a diluting agent based on printing speed.

(2) In order to get ideal printing pattern, we can choose meshwork with less 200 grid/cm2 to make plate. If we use the meshwork of less mesh, the ink layer will be print more thick, then we can get more bright pattern. So the meshwork with 80-120 grid/cm2 is ideal.
(3) Apply a white background coat under the luminous material layer to improve afterglow. Having the glow on top of any other color will diminish the glow strength.

(4) Regarding the thickness of printing ink layer, 100 um film thickness is required to achieve the best results. If you want the maximum luminous effect use 130-150 um thickness. Sometimes more than one pass will be necessary to obtain the level of glow required, the second or more pass should wait until the last layer has dried.

(5) If screen printing clothes try to use white fabric, any other color will decrease the glow. If using a non-white fabric, place a white layer below the luminous layer for the best glowing effect.

(6) One kilogram of dry photoluminescent pigment can cover an area roughly 3.3 square meters or 12 square feet with a 150 um thick film. One gram covers approximately 25 square centimeters.
https://www.facebook.com/glowpowders