2014年9月19日星期五
How much ratio of pigments should we take when make the luminescent products ?
This universal question has one answer. It is up
to you. The amount of photoluminescent pigment to medium will depend on how
much glow desired, cost effectiveness, type of application method etc. The
Basic Guidelines dictate from 10% to 50% by weight. If you are producing a low
cost item, then a lower percentage would work best for you. If you are screen
printing shirts and want to make only one pass, a higher percentage would work
better. Please also consider the particle size of the powder and the color of
the surface to which the medium is going to be applied. Experimentation will be
the best method of determining ratios after following the guidelines found on
this paper.
2014年9月14日星期日
How to make photoluminescent ceramic glaze by using glow powder
Our pigment can be applied to make photoluminescent ceramic
glaze directly. Following content is some information about the method of making
photoluminesent ceramic glaze for your reference.
1.Make the based normal transparent ceramic glaze.The glaze should be ground thin,can through the 250mesh sieve.
2.Mixing well the photoluminescent pigment and the based ceramic glaze by the proportion of 4:6 to make the luminous ceramic glaze.
3.During the production,don't let the photoluminescent pigment touch with the metal material,otherwise the luminous effect will be affected
Use of Luminous Glaze of Pottery
1. Luminous glaze on the surface of internal brick wall
(1) Mix TGB-45M luminous glaze of pottery and water in the ratio of 1: 0.6—0.7 in ball grinding machine for about 20 minutes to prepare glair.
(2) Use the way of spreading, pouring and dropping glaze on the pottery blanks to form 200---400μm glaze layer.
(3) Let them dry.
(4) Quickly bake them for 35—50minutes with a temperature of 1000--1080℃ to get the glaze surface bricks that used on internal wall. 2. Luminous Ground Brick (with designs)
(1) Mix evenly TGB—45H luminous glaze of pottery and proper meshwork oil to get meshwork printing slurry.
(2) Print luminous glair using meshwork on the surface bricks with white unbaked glaze layer to form luminous designs.
(3) Pour transparent glair on the surface of designs.
(4) Bake them for 35—45 minutes with a temperature of 1100--1180℃ to get ground bricks with luminous designs. 3. Internal Wall Bricks with Luminous Design (Baked for three times)
(1) Mix TGB—45L luminous glair of pottery with proper printing oil of meshwork to prepare slurry for meshwork printing.
(2) Print luminous designs on the surface of baked bricks with white glaze.
(3) Pile transparent dry glaze powder on the luminous designs with meshwork.
(4) Bake them for 40—45 minutes with a temperature 900---1000℃ to get bulgy designs on the bricks for decoration of internal wall.
Notice:
1. Avoid attrition between luminous glaze and metals, or will influence luminous effects.
2. if there is settle in glair, add 2% pengrun earth to increase suspension of glair.
3. The preferential product applied is the transparent glaze produced by our corporation.
1.Make the based normal transparent ceramic glaze.The glaze should be ground thin,can through the 250mesh sieve.
2.Mixing well the photoluminescent pigment and the based ceramic glaze by the proportion of 4:6 to make the luminous ceramic glaze.
3.During the production,don't let the photoluminescent pigment touch with the metal material,otherwise the luminous effect will be affected
Use of Luminous Glaze of Pottery
1. Luminous glaze on the surface of internal brick wall
(1) Mix TGB-45M luminous glaze of pottery and water in the ratio of 1: 0.6—0.7 in ball grinding machine for about 20 minutes to prepare glair.
(2) Use the way of spreading, pouring and dropping glaze on the pottery blanks to form 200---400μm glaze layer.
(3) Let them dry.
(4) Quickly bake them for 35—50minutes with a temperature of 1000--1080℃ to get the glaze surface bricks that used on internal wall. 2. Luminous Ground Brick (with designs)
(1) Mix evenly TGB—45H luminous glaze of pottery and proper meshwork oil to get meshwork printing slurry.
(2) Print luminous glair using meshwork on the surface bricks with white unbaked glaze layer to form luminous designs.
(3) Pour transparent glair on the surface of designs.
(4) Bake them for 35—45 minutes with a temperature of 1100--1180℃ to get ground bricks with luminous designs. 3. Internal Wall Bricks with Luminous Design (Baked for three times)
(1) Mix TGB—45L luminous glair of pottery with proper printing oil of meshwork to prepare slurry for meshwork printing.
(2) Print luminous designs on the surface of baked bricks with white glaze.
(3) Pile transparent dry glaze powder on the luminous designs with meshwork.
(4) Bake them for 40—45 minutes with a temperature 900---1000℃ to get bulgy designs on the bricks for decoration of internal wall.
Notice:
1. Avoid attrition between luminous glaze and metals, or will influence luminous effects.
2. if there is settle in glair, add 2% pengrun earth to increase suspension of glair.
3. The preferential product applied is the transparent glaze produced by our corporation.
photoluminescent glow sticker luminous adhesive tape vinyl
Glow in the dark sticker, photoluminescent sticker
Glow color: Yellow green
Thickness without back paper: 0.23mm
Materials: PET
Other available width: 1cm，2cm，2.5cm, 3cm, 5cm, 7.5cm, 10cm
Welcome to contact us for OEM orders!
About glow in the dark sticker
In general indoor lighting or natural light for about 20-30 minutes, you can continue to glow in the dark for 8 hours
No power or other artificial energy use, the full use of natural light environment itself.
* Can be used permanently, non-radioactive, chemically stable, safe and reliable, good weather resistance.
* Long life, environmentally friendly, non-toxic, cost-effective. Super brightness,
Allowing you to be more of a peace of mind in the dark.
* Glow in the dark tape not only bring you super warning effect, but also for your stage performances, adding a unique color.
This product is luminescent light-emitting strips, you must first absorption to light, so the light source shall be installed at.
Glow color: Yellow green
Thickness without back paper: 0.23mm
Materials: PET
Other available width: 1cm，2cm，2.5cm, 3cm, 5cm, 7.5cm, 10cm
Welcome to contact us for OEM orders!
About glow in the dark sticker
In general indoor lighting or natural light for about 20-30 minutes, you can continue to glow in the dark for 8 hours
No power or other artificial energy use, the full use of natural light environment itself.
* Can be used permanently, non-radioactive, chemically stable, safe and reliable, good weather resistance.
* Long life, environmentally friendly, non-toxic, cost-effective. Super brightness,
Allowing you to be more of a peace of mind in the dark.
* Glow in the dark tape not only bring you super warning effect, but also for your stage performances, adding a unique color.
This product is luminescent light-emitting strips, you must first absorption to light, so the light source shall be installed at.
订阅：
博文 (Atom)